(905 ) 794-5508

(905 ) 794-5508 / 9 AM – 5 PM EST / Monday – Friday

IPC-VC2-WIFI

$90.00

This is a battery-powered camera that connects to WiFI. It can be mounted outdoors, and uses the Vicohome app. It uses a small magnetic base to attach, and has a battery life of ~2-4 weeks. You can charge it using the included MicroUSB charging cable.

Out of stock

Categories: IP CamerasTags: 2MP, Wireless

Product Overview

The IPC-VC2-WIFI is a battery-powered IP camera with a magnetic base mount. It can be installed easily using a Philips screwdriver, and added to your mobile device by following the instructions in the app. It connects to your home wi-fi and can be viewed remotely after initial setup.

This camera stores information to a MicroSD card (not included) and doesn’t require any cloud subscription. The camera also have a built-in microphone and speaker, allowing for clear two-way audio through the VicoHome app.

Included Accessories

  • 4* Drywall screws
  • 4* Plastic drywall anchoes
  • 1* Mounting base with magnet
  • 1* MicroUSB charging cable

Specification

   Technical Specification
Master Processor SOC HI3518E V300
Image Sensor Sensor 1/3″ color CMOS Sensor, 2-megapixel
Visual angle H (horizontal) 95 degrees; V (vertical) 55 degrees; D (diagonal) 110 degrees
Minimum Illumination 0.01 Lux
Audio Input/Output Two-way voice intercom available (built-in Microphone and speaker)
Audio Compressing Method AAC
Video Video Compressing Method H.265 (support H.264, H.265)
Lighting Frequency 50Hz, 60Hz
Image Frame Rate 15 fps(Max 30fps)
Maximum Image Resolution 1920*1080P
Light Source for Night Vision IRCUT double optical filter automatic switching, and 8 infrared lights (850nm wavelength)Irradiation distance: 7M
Network Wireless Network 2.4G Wi-Fi (IEEE802.11b/g/n), built-in antenna
Protocols Supported TCP/IP, UDP/IP, DHCP, RTMP, MUTP
IP Address Supported Dynamic IP address supported
AI Intelligent Features Human contour detection, activity zone,intelligent push,  pet snapshot
Alarm Notification Alarm Methods Alarm push by mobile APP,  alarm sound
Wake-up Wake-up Method PIR body induction wake-up, and remote positive wake-up
Video Recording Recording Method Alarm triggered recording, and manual recording
Video Storage Cloud storage, local Micro SD card, and mobile phone memory
Indicator Lamps LED Indicator RGB tri-color lamp indicating the status of power/network signal/functionality
Battery Capacity 18650*2 ; 5200mAh/6700mAh
Removability Unremovable
Battery Life 6 months (provided that 20 10s videos are recorded per day)
Standby Time 1 year
Charging Voltage DC 5V/1.5A(Micro USB)
Charge Time < 8 hours
Protection Method IP65 resistance to dust and water;over-current/over-discharge/over-charge/short circuit/charging protection at high & low temperatures
Interfaces Power Supply 1 Micro USB interface
SD Card 1 Micro SD card (up to 128GB supported)
Keys 1 reboot key and 1 on/off key
Installation Method Installation Method Magnet and 1/4 universal screw holes
Environment Dustproof and waterproof IP65
Operating Environment -10° ~ 45°C  /10% ~ 80%  (no condensation)
Storage Environment -20°C ~ 60°  /0% ~ 90% (no condensation)
Specifications Size (LxWxH) 58mm*84mm*91mm(with bracket excluded)
Net Weight of Bare Machine Approx. 267g
Finished weight Approx. 500g
Material + Process ABS
Color White with high gloss
Certifications Certificate RoHS,CE,FCC,WEEE,MSDS,UN38.3,IPX6
APP VicoHome